CS Series  | CS108  | CS110  | CS122  | CS152  | CS225  | CSM12  | CSM15  | CSM22
CS225 is a high performance two way full range multipurpose loudspeaker, it covers angle for 90 ° x60 ° oval broadband constant directivity waveguide horn, which loads 3 "titanium diaphragm HF compression driver, and with 2x15" woofer efficient radial magnetic circuit composed. The box body is inverter, solid, and LF output clear while in a large dynamic.Because of its double 15" woofer design, CS108 can be used sperately without other subwoofer, it can be applied to high sound pressure needs place, buildings, large outdoor PA, delay sound reinforcement and background music. It uses a multilayer birch plywood manufacturing cabinet, strengthen environmental coat protect the shell,speakers use triangle mesh metal mesh enclosure stick acoustic soft sponge as the speaker protection. Top, bottom and side behind were installed by 12units of M10 screws.rear panel also equipped with 2 integrated wooden handles, terminal is equipped with NL4 parallel interface and bi-amp or full range drive switch. At the bottom of the speakers, there are with mounting bracket to support the base.
■ 2-way full range system
■ radian symmetric polygon body design
■ oval broadband constant directivity waveguide horn
■ efficient radial magnetic circuit design of LF drive
■ inverter type of LF radiation
■ extremely low distortion, to guarantee excellent fidelity tone
■ equivalent phase correction for crossover network
■ voptional single-amp or bi-amp drive
■ versatility
■ conference centers, churches, auditoriums
■ bars, nightclubs, clubs
■ theater sound reinforcement, theme parks
■ stage side sound reinforcement
■ mobile or fixed installation audio and video systems
■ Performancing PA
Frequency Response
Nominal Impedance
Power Handing
Maximum SPL
Nominal Dispersion
Crossover Frequency
50 Hz - 20 kHz (±3 dB)
106 dB SPL (1W @ 1m)
8 ohms
1700 watts (rms) , 3400 watts (program) , 6800 watts (peak)
132 dB
115°(horizontal), 85°(vertical)
0.8 kHz
Low Frequency(neodymium magnet)
Low Frequency(ferrite)
2 x 15(in) 380 mm (dia), 2x75 mm(3in)(voice coil dia)
1 x 3(in) 75 mm (voice coil dia), 36 mm(1in)(throat dia)
Enclosure Construction
Input Connectors
Dimensions H x W x D
Net Weight
15 mm (birch plywood with structured)
Wear-resistant textured black paint
Powder coated perforated steel,foam backed
12 x M10
Bi-amp or passive drive
NL4 x 2
1100 mm x 436 mm x 420 mm
41.5 kg
© 2022 Copy right BOB Professional Audio Co.,Ltd       Contact us  |   Privacy  |   Sitemap