CS Series  | CS108  | CS110  | CS122  | CS152  | CS225  | CSM12  | CSM15  | CSM22
CS108 is a high performance two way full range multipurpose loudspeaker, it covers angle for 90 ° x60 ° oval broadband constant directivity waveguide horn, which loads 1.73 "titanium diaphragm HF compression driver, and with 8" woofer efficient radial magnetic circuit composed. The box body is inverter, solid, and LF output clear while in a large dynamic.CS108 can be used for voice or music amplification,such as an independent system or with the full-range of large-scale distributed systems.With the other series subwoofers can easily make a higher level of the music programs. Polygonal box could be vertical or horizontal mounting. It uses a multilayer birch plywood manufacturing cabinet, strengthen environmental coat protect the shell,speakers use triangle mesh metal mesh enclosure stick acoustic soft sponge as the speaker protection. Top, bottom and side behind were installed by 12units of M8 screws.rear panel also equipped with an integrated handle, terminal is equipped with NL4 parallel interface. At the bottom of the speakers, there are with mounting bracket to support the base.
■ 2-way full range system
■ radian symmetric polygon body design
■ oval broadband constant directivity waveguide horn
■ efficient radial magnetic circuit design of LF drive
■ inverter type of LF radiation
■ extremely low distortion, to guarantee excellent fidelity tone
■ equivalent phase correction for crossover network
■ versatility
■ Conference room, churches, showrooms
■ Bars, nightclubs, clubs
■ Theatre fills
■ Small size of language sound reinforcement system
■ Mobile or fixed installation audio and video system
Frequency Response
Nominal Impedance
Power Handing
Maximum SPL
Nominal Dispersion
Crossover Frequency
100 Hz - 20 kHz (±3 dB)
95.5 dB SPL (1W @ 1m)
8 ohms
200 watts (rms) , 400 watts (program) , 800 watts (peak)
118 dB
115°(horizontal), 85°(vertical)
2.0 kHz
Low Frequency(neodymium magnet)
Low Frequency(ferrite)
1 x 8(in) 210 mm (dia), 50 mm(2in)(voice coil dia)
1 x 1.73(in) 44 mm (voice coil dia), 26 mm(1in)(throat dia)
Enclosure Construction
Input Connectors
Dimensions H x W x D
Net Weight
15 mm (birch plywood with structured)
Wear-resistant textured black paint
Powder coated perforated steel,foam backed
9 x M8
Integral pole mount socket
NL4 x 2
430 mm x 280 mm x 288 mm
10 kg
© 2022 Copy right BOB Professional Audio Co.,Ltd       Contact us  |   Privacy  |   Sitemap