AS200 Series  | AS215  | AS212  | AS210  | AS208  | AS206  | AS205
AS208 is a 2-way line array with constant curvature line array design. Built-in 1x8" radil magnet circuit neodymium LF drive unit, 1x1.73" HF drive unit on wavefront corrected drum shape waveguide horn. AS208 can be composed as line array or used as stronge pointing point source speaker, When being the array, the horizontal direction is the total angle of all enclosure, the asymmetric 75° design on vertical direction.It is optional choise for composite material or multi-layer birch plywood manufacturing housing, strong elastic coating protection shell, hex mesh metal mesh enclosure stick acoustic soft sponge as speaker protection, side plate incorporates several handle and suspension device. Array compensation switch adjustment on the rear panel along with single-amp and bi-amp switch and NL4 interface. When being line array, vertical coupling angle of each speaker can be adjusted between 0°~4.5°according to different occassiona and user, AS208 can be suspended, piled up and supported.
■ 2-way constant curvature line array system
■ asymmetrical horn design
■ radial magnetic circuit high power neodymium magnet low frequency units
■ optional single-amp or bi-amp drive mode
■ provides array compensation switch adjustment
■ ultralight compact enclosure
■ box is painted with special wear-resistant, anti-collision plastic coating
■ special suspension device, lifting, stacking and easy installation
■ optional with DSP digital amplifier.
■ theatre sound amplification
■ portable or fixed installation
■ theme parks, stadiums, nightclubs
■ Central or side of the large PA system sound reinforcement
Frequency Response
Nominal Impedance
Power Handing
100Hz - 20 kHz @(±3 dB)
HF 105dB , LF 96dB SPL (1W / 1m)
HF 8 ohms , LF 8 ohms
HF 50 watts(rms),100 watts(program),200 watts(peak)
LF 150 watts (rms), 300 watts (program), 600 watts(peak)
Maximum SPL
Nominal Coverage Angle(-6 dB)
Maximum vertical splay
Crossover Frequency
Recommended High Pass Filter
horizontal 75° asymmetric
vertical splay 22.5°, 4.5° step
1.5 kHz
high pass => 100 Hz , 24 dB/octave
Low Frequency(ferrite)
High Frequency(ferrite)
1 x 8(in) 220 mm dia, 50 mm(2in)voice coil dia
1 x 1.73(in) 44 mm voice coil dia, 26 mm(1in) throat dia
Enclosure Construction
Suspension Hardware
Input Connectors
Dimensions H x W x D
Net Weight
15 mm birch plywood with structured
Wear-resistant textured black paint
Powder coated perforated steel,foam backed
Bi-amp or passive drive
Proprietary BOB rigging system
Speakon NL4 x 2
280 mm x 472 mm x 329 mm
11.2 kg
© 2022 Copy right BOB Professional Audio Co.,Ltd       Contact us  |   Privacy  |   Sitemap